| MODEL:LH-X/D24-2 | LH | Lightning pick surge protector |
| X | Signal surge protector | |
| D | D; Conventional 2-wire product (suitable for voltage signal or switching signal); Default: 2-wire current loop product | |
| 24 | Rated working voltage: 6, 12, 24, 48V | |
| 2 | Structure: The default is plug-in type; 2: It is integral type |
1. The lightning protection device is connected in series between the protected equipment and the signal channel. 2. The input terminal (IN) of the lightning arrester is connected to the signal channel, and the output terminal (OUT) is connected to the input terminal of the protected equipment, and cannot be reversed. 3. Reliably connect the ground wire of the lightning protection device with the ground wire of the lightning protection system. 4. This product does not require special maintenance. When the lightning protection device is suspected to be malfunctioning, the lightning protection device can be removed and thenchecked. If the system returns to normal after the system is restored to the state before use, the lightning protection device should be replaced.
| model | LH-X-12 | LH-X-24 | LH-X-220 |
| Maximum continuous operating voltage Uc | 12/24/220V~ (optional can be customized) | ||
| Nominal discharge current In (8/20) | 5 | 5 | 5 |
| Maximum discharge current Imax (8/20) | 10 | 10 | 10 |
| Protection level Up | 0.2KV | 0.3KV | 1.1KV |
| Optional appearance | Optional and customizable | ||
| working environment | -40 ℃~+100℃ | ||
| Relative humidity | ≤95％（25℃） | ||